blanking line
Home |

blanking line

  • Square HVAC air duct auto manufacture line

    Duct Manufacturing AutoLine Vl

    HVAC duct line VI,the U-shaped structure not only saves the production site, but also reduces the delivery time of raw materials. The production efficiency is high (about 20-23 seconds per piece). The department fully automatically realizes the fixed size cutting, beading, automatic cutting ,the notching,pittsburgh forming, TDF flange and the angle iron flange ,automatically forming and bent into ”L“, ”U“, ”口“ shaped duct. Equipped with punching support air, common plate flange hole is optional.It has the advantages of high automation, high efficiency, labor saving and material saving.

    Hot Tags : Full automatic duct production line Duct making machine line HVAC duct making machine HVAC air duct line HVAC duct manufacturing machines line Auto duct making machine

    Read More
  • Duct fabrication machinery

    Duct Manufacturing Duct Line V

    Ventilation duct machine The air duct production line V is composed of feeding frame, leveling and beading, hydraulic punching point and square mouth, hydraulic shearer, movable pittsburgh forming machine,feeding platform, duplex flange machine, duplex angle iron flange machine (or double snap lock machine), servo feeding platform and TDF hydraulic folding. The computer control part adopts full computer control, bending with servo feeding, accurate positioning, especially when processing the bigger air duct, to ensure the bending accuracy.

    Hot Tags : Duct equipment Duct fabrication machinery Air duct fabrication machine CNC duct fabrication machine line Ventilation duct machine

    Read More
  • Ac duct machine

    Duct Manufacturing Auto Line ll

    Air Duct Machine Line Ⅱ is mainly for TDF flange blanking,meanwhile,it can be used for normal sheet blanking.Matched with TDF forming machine,pittsburgh lock former,folder and angle joint joint,the line can produce nice TDF ducts.

    Hot Tags : Air Duct Machine Line Duct Machine Line Ac duct machine Duct Machine LineⅡ Air Duct Line Ⅱ

    Read More
  • Damper frame forming machine

    Fire Damper Frame Automatic Production Line

    Fire damper machine consists of frame production line,positive pressure air supply outlet production line,blades forming machine,supporting bar forming machine,spring forming machine,riveting platform and so on.

    Hot Tags : VCD frame production line VCD frame forming machine Fire damper machinery VCD damper frame roll forming machine

    Read More
  • Duct GI manufacturing auto line

    Duct Manufacturing Auto Line VIII

    Air duct production line  Ⅷ is a new type of air duct automatic production line of our company. The U-shaped structure not only saves the production site, but also reduces the delivery time of raw materials. The production efficiency is high (about 20-23 seconds per piece). The department fully automatically realizes the fixed size cutting, beading, automatic cutting ,the notching, single hem forming, pittsburgh forming, TDF flange and the angle iron flange ,automatically forming and bent into ”L“, ”U“, ”口“ shaped duct. Equipped with punching support air, TDF flange hole is optional. Pittsburgh is formed before bending the short side of the large size duct. It has the advantages of high automation, high efficiency, labor saving and material saving.

    Hot Tags : Duct manufacturing auto line Fully-automatic duct making line HVAC duct machinery line Automatic duct line Rectangular duct forming machine HVAC machine

    Read More
  • HVAC machinery

    Duct Manufacturing Auto Line VII

    HVAC duct line  Ⅶ ,with U-shaped structure not only saves the production site, but also reduces the delivery time of raw materials. The production efficiency is high (about 20-23 seconds per piece). The department fully automatically realizes the fixed size cutting, beading, automatic cutting ,the notching, single hem folding, pittsburgh forming, TDF flange and the angle iron flange ,automatically forming and bent into ”L“, ”U“, ”口“ shaped duct. Equipped with punching support air, TDF flange hole is optional. Pittsburgh is formed before bending the short side of the large size duct.C+S flange is optional.It has the advantages of high automation, high efficiency, labor saving and material saving.

    Hot Tags : HVAC machinery line HVAC machinery HVAC auto duct line machine HVAC fabricate duct complete line

    Read More
  • Cut to length line

    Duct Manufacture Super Auto-Line l

    Dcoiler and leveler line is used for different roll bending.It gets a flat plate of requirement width and length after decoil,leveler and cutting.It is combined with feeding shelf,decoiller,leveling,transporter,guiding device set-to- length device,plastic-cover device,shearing machine,transporting table.

    Hot Tags : Cut to length line blanking line Metal cutter Decoiler and straight for material Steel coil cutting machine Coil cut to length line

    Read More
  • HVAC duct fabrication machine

    Duct Manufacturing Auto Line lll

    HVAC duct fabrication machine Ⅲ features in high auomation,high efficiency and saving materials,which is very suitable for mass production of square ducts. Autoline - III consists of a metal feeding frame, leveling and grooving equipment, hydraulic punching square notch equipment, hydraulic cutter and folder. The electrical control system uses a computer with a closed-loop and servo-system to increase the precision and reliability of the manufacture line. The maximum working speed is 16m/min.The length tolerance is±0.3mm. The diagonal line tolerance is ±0.5mm.   One team will produce 1000㎡of square duct by using this system.

    Hot Tags : HVAC duct fabrication machine line Duct fabrication machine line HVAC duct machine Air duct forming machine Hvac machines

    Read More
  • Duct GI manufacturing auto line

    Duct GI Manufacturing Auto Line VIII

    HVAC machine Air duct production line  Ⅷ is a new type of air duct automatic production line of our company. The U-shaped structure not only saves the production site, but also reduces the delivery time of raw materials. The production efficiency is high (about 20-23 seconds per piece). The department fully automatically realizes the fixed size cutting, beading, automatic cutting ,the notching, single hem forming, pittsburgh forming, TDF flange and the angle iron flange ,automatically forming and bent into ”L“, ”U“, ”口“ shaped duct. Equipped with punching support air, TDF flange hole is optional. Pittsburgh is formed before bending the short side of the large size duct. It has the advantages of high automation, high efficiency, labor saving and material saving.
    Read More
  • HVAC duct fabrication machine

    HVAC duct fabrication machineⅢ

    HVAC duct fabrication machine Ⅲ features in high auomation,high efficiency and saving materials,which is very suitable for mass production of square ducts. Autoline - III consists of a metal feeding frame, leveling and grooving equipment, hydraulic punching square notch equipment, hydraulic cutter and folder. The electrical control system uses a computer with a closed-loop and servo-system to increase the precision and reliability of the manufacture line. The maximum working speed is 16m/min.The length tolerance is±0.3mm. The diagonal line tolerance is ±0.5mm.   One team will produce 1000㎡of square duct by using this system.

    Hot Tags : Duct forming machine

    Read More
  • HVAC machinery

    HVAC Machinery Line Ⅶ

    HVAC duct line  Ⅶ ,with U-shaped structure not only saves the production site, but also reduces the delivery time of raw materials. The production efficiency is high (about 20-23 seconds per piece). The department fully automatically realizes the fixed size cutting, beading, automatic cutting ,the notching, single hem folding, pittsburgh forming, TDF flange and the angle iron flange ,automatically forming and bent into ”L“, ”U“, ”口“ shaped duct. Equipped with punching support air, TDF flange hole is optional. Pittsburgh is formed before bending the short side of the large size duct.C+S flange is optional.It has the advantages of high automation, high efficiency, labor saving and material saving.
    Read More
  • Cut to length line

    Decoiler and Leveler Line

    Dcoiler and leveler line is used for different roll bending.It gets a flat plate of requirement width and length after decoil,leveler and cutting.It is combined with feeding shelf,decoiller,leveling,transporter,guiding device set-to- length device,plastic-cover device,shearing machine,transporting table.
    Read More
1 2
[  A total of  2  pages]

online service

service

online service

Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.